Table of Contents
Advertisement
Key Path
Related Functions
Remote
Commands
Key Path
Related Functions
Key Path
Remote
Commands
Function Reference
Current Source Setup
Current Source Setup
Accesses the Current Source Setup panel that allows you to turn on or off the
current source, set the current limit, enable pulse width, duty ratio, and syn-
chronize the ADC sync output.
Source" on page 2-4
System > Options > Current Source Setup
ADC sync, current limit, pulse width, duty ratio
SOURce:CURRent:PULSe:STATe ON|OFF
Date/Time (Display Setup Panel)
Turns the date and time on the display on or off. When on, the date and time
will appear on the display's lower, right corner of the display and on printouts.
System > More System Functions > Display Setup
SYSTem:TIMe
Default Math Trace C
Defines the math expression to be used and turns the math operation on:
C=A
-B, C=A
+B, C=A
LOG
LOG
The math operation is performed in linear units.
See "Using Trace Math to Measure Wavelength Drift" on page
Traces > Trace Math Off > Default Math Trace C
CALCulate3:MATH:STATE OFF|ON|0|1
3-20
Refer to "Operating the Internal White Light
-B, or C=A
+B. The result is placed in Trace C.
LIN
LIN
2-29.
Advertisement
Table of Contents
