Key Path
Remote
Commands
Key Path
Remote
Commands
Key Path
Related Functions
Remote
Commands
Markers > Peak Search
Markers > More Marker Functions > Marker Search Menu > Search Mode
Peak > Peak Search
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Peak Search at End of Each Sweep (Marker Setup
Panel)
Finds the peak value of the trace and moves the active marker to the peak at
the end of each sweep. This function operates on normal, delta, and band-
width markers.
Markers > Marker Setup > Peak Search at End of Each Sweep
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Peak to REF LEVEL
Sets the value of the reference level equal to the value of the highest point on
the active trace.
Amplitude > Peak to REF LEVEL
Reference Level
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRLevel
Peak Search at End of Each Sweep (Marker Setup Panel)
Function Reference
3-59