Agilent Technologies 86142B User Manual page 111

Key Path
Remote
Commands
Key Path
Related Functions
Remote
Commands
Function Reference
Hold A...F None Min Max (trace)
Hold A...F None Min Max (trace)
Hold Max compares the current amplitude value of each point on the active
trace in the current sweep to the corresponding point detected during the
previous sweep, then displays the maximum value.
Hold Min compares the current amplitude value of each point on a trace in the
current sweep to the corresponding point detected during the previous
sweep, then displays the minimum value.
Hold None turns the Hold function off.
Traces > Hold None Min Max
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Integrate Limit
Calculates the power between Wavelength Marker 1 and Wavelength Marker 2
when the trace integration function is on.
Once wavelength markers have been turned on, the total power integration
marker search, and wavelength sweep may be individually limited to the wave-
length marker range.
Markers > More Marker Functions > Line Marker Menu > Advanced Line
Mkr Functions > Integrate Limit
Sweep Limit, Search Limit
CALCulate:TPOWer:IRANge:LOWer
CALCulate:TPOWer:IRANge:UPPer
3-32