Agilent Technologies 86142B User Manual page 188

OK. Press Yes if the address is correct.
14 When prompted to enter additional network parameters, press Yes.
15 Enter the Subnetwork Mask and Gateway IP Address then press OK. If the
parameters are correct, press Yes.
16 Enter the Domain Name System and DNS Server IP Address then press
OK. If the parameters are correct, press Yes.
17 Press Close when the Register Node with Name Server window opens.
18 When prompted for the NIS Domain Name and NIS Server Name, press
Cancel. This is not required for this application.
19 Press Done when the Network Configure window opens.
20 The Networking Configure Utility window will open. Check the entered
information. If all the information is correct, press OK or
return to the network configuration menu. The OSA will restart, taking
approximately five minutes.
Remote Front Panel Operation
Remote Front Panel
BACK to
PRESS
4-5