Table of Contents
Advertisement
C A U T I O N
4 Lift up the paper latch as shown in the following diagram, and remove the
5 Unscrew the retaining screw that secures the sheet-metal cover that protects
6 Lift the printer head lever to the vertical position. Then, tilt the lever towards
Maintenance
Printer Head Cleaning Procedure
Avoid dropping the coin or screwdriver, used to open the printer door, into the
printer assembly.
paper.
the printer head from electrostatic discharge. Slide the sheet-metal cover
towards the retaining screw and then lift it straight up to remove.
the instrument's rear panel to rotate the printer head up.
6-6
Advertisement
Table of Contents
