Table of Contents
Advertisement
To clean the
printer head
1 Turn off the Agilent 86140B series optical spectrum analyzer, and remove the
2 Place the instrument at a static-safe work station as described in the
3 Use a coin or screwdriver to open the printer door that is located on the top of
Figure 6-1. Example of a static-safe workstation
Table 6-2. Printer Accessories
Agilent Part Number
9270-1605
line power cord.
introduction to this procedure.
the instrument.
Printer Head Cleaning Procedure
Description
Printer Paper
Maintenance
6-5
Advertisement
Table of Contents
