Agilent Technologies 86142B User Manual page 127

Key Path
Remote
Commands
Key Path
Remote
Commands
Key Path
Remote
Commands
Function Reference
Next Peak Right →
Next Peak Right
Places the marker on the next peak located at a higher X-axis value (usually
wavelength) than the current marker position. This peak must meet the peak
excursion and threshold criteria. If the specified marker is off, it will be turned
on and placed at the center wavelength or frequency.
Markers > More Marker Functions > Marker Search Menu > Next Peak →
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:RIGHt
←
Next Pit Left
Places the marker on the next pit located at a lower X-axis value (usually
wavelength) than the current marker position. This pit must meet the pit
excursion and threshold criteria. If the specified marker is off, it will be turned
on and placed at the center wavelength or frequency.
Markers > More Marker Functions > Marker Search Menu > Next Pit ←
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum:LEFT
→
Next Pit Right
Places the marker on the next pit located at a higher X-axis value (usually
wavelength) than the current marker position. This pit must meet the pit
excursion and threshold criteria. If the specified marker is off, it will be turned
on and placed at the center wavelength or frequency.
Markers > More Marker Functions > Marker Search Menu > Next Pit →
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum:RIGHt
3-48
→