Agilent Technologies 86142B User Manual page 128

Key Path
Remote
Commands
N o t e
Key Path
Related Functions
Remote
Commands
↑
Next Pit Up
Places the active marker on the next lowest pit from the current marker
amplitude. This pit must meet the pit excursion and threshold criteria. If the
specified marker is off, it will be turned on and placed at the center wave-
length. The search for the next minimum will reference that point.
Markers > More Marker Functions > Marker Search Menu > Next Pit ↑
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum:NEXT
Noise Marker
Measures the spectral power density at the position of the active marker. The
measurement is referenced to 0.1 nm or 1.0 nm reference bandwidth. The ref-
erence bandwidth used to normalize the noise is selected on the marker setup
panel.
For Agilent 86144B/86146B only, if filter mode is enabled, the noise marker,
delta marker, and OSNR marker are disabled.
Markers > More Marker Functions > Noise Marker
Active Marker
CALCulate:MARKer:FUNCtion:NOISe:STATe OFF|ON|0|1
Function Reference
Next Pit Up ↑
3-49