Table of Contents
Advertisement
Key Path
Remote
Commands
Key Path
Key Path
Remote
Commands
Reset Min/Max Hold
Resets trace hold data and returns to the Traces function keys where you can
select an active trace, trace input, update, view, and hold functions.
Traces > Hold (trace) > Reset Min/Max Hold
CALCulate[1|2|3|4|5|6]:MAXimum:CLEar
CALCulate[1|2|3|4|5|6]:MINimum:CLEar
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Restore Internal Memory
Accesses the instrument restore utility. This operation will remove all existing
files from internal memory (that is, measurement, trace, and specification
sets) and replace them with files from a floppy disk. These files are created
using the Backup Internal Memory function.
Internal Memory" on page 2-20
Save/Recall > Backup/Restore Menu > Restore Internal Memory
Revision
Displays the instrument's firmware revision information.
page 3-31
and
"Firmware Upgrade" on page
System > Help > Revision
*IDN?
Function Reference
Reset Min/Max Hold
See "Backing Up or Restoring the
See "Help" on
3-30.
3-73
Advertisement
Table of Contents
