Table of Contents
Advertisement
Key Path
Remote
Commands
Key Path
Remote
Commands
Function Reference
Search Limit On/Off
Search Limit On/Off
When the search limit function is on, all the marker peak/pit searches will
apply only to the range specified by the two wavelength line markers.
Markers > More Marker Functions > Line Marker Menu > Advanced Line
Mkr Functions > Search Limit On/Off
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:STATe
Search Mode Peak/Pit
Allows you to select between peak and pit search modes. The selection on the
marker search menu will change depending on which of the two modes is
selected.
Markers > More Marker Functions > Marker Search Menu > Search Mode
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum
3-80
Advertisement
Table of Contents
