Table of Contents
Advertisement
Key Path
Related Functions
Remote
Commands
N o t e
Key Path
Related Functions
Function Reference
Reference Level Position (Amplitude Setup Panel)
Reference Level Position (Amplitude Setup Panel)
Determines the position of the reference level on the graticule. Setting this
value to zero divisions places the reference level on the very bottom of the
grid. Setting the reference level to 10 divisions places the reference level at
the top of the grid. The default (or preset) position is 9 divisions, which is one
major graticule down from the top of the
page 3-69
The reference level position can be changed using the knob, step keys, or
numeric keypad.When using the knob or step keys, the value will automati-
cally change. When using the numeric keypad, a terminator must be selected
from the softkey panel.
Amplitude > Amplitude Setup > Reference Level Position
Amplitude Units, Amp Display Mode, Reference Level, Scale/Div
DISPlay:WINDow:TRACe:Y:SCALe:RLPOS
Remote File Share Panel
Uses the LAN (local area network) to store, recall, or delete data to remote
hard drives. The data can then be accessed and shared among the users and
printed on designated, network printers.
Trace Data" on page 2-24
To access the file and printer share softkeys, you must first configure the
network and enter the user share identity/user profile information for remote
shares. The softkeys for file and printer share will then become available for
selection.
System > More System Functions > GPIB & Network Setup > File Shares >
Remote File Shares
Remote Printer Share
3-70
display.See "Reference Level" on
See "Recalling Measurement and
Advertisement
Table of Contents
