Table of Contents
Advertisement
• Fast Measurement Recall Mode
• Recall Setup Panel Mode
1 Press the front-panel Save/Recall key.
2 Press the Fast Meas RECALL softkey.
3 The instrument recalls the measurement state previously saved as
N o t e
N o t e
1 Press the front-panel Save/Recall key.
2 Press the Recall Menu.... softkey.
3 The Recall Setup panel opens.
N o t e
Recall Setup Panel
Selections
Using the Instrument
Saving, Recalling, and Managing Files
Recalling Measurement and Trace Data
You can recall measurement and trace data using the following methods:
Refer to "Recall (Recall Setup Panel)" on page
Recalling Data in Fast Meas Recall Mode
FASTSAVE.dat by the Fast Meas Save function.
The auto span value will not be saved with the measurement.
Recalling Measurement and Trace Data
To insure accurate measurements, a wavelength calibration should be
performed each time measurement data is recalled from memory.
The Recall Menu setup panel
The auto span value will not be saved with the measurement.
Recall
Selects whether a measurement or trace will be recalled.
2-24
3-67.
Advertisement
Table of Contents
