Installing The Os; Configure The Preinstalled Os - Oracle SPARC T7-2 Installation Manual

Installing the OS

Related Information
SPARC T7 Series Servers Administration Guide
■
Oracle ILOM documentation
■
"Configure the Preinstalled OS" on page 58
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 59
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 61
■
"Assign a Static IP Address to the NET MGT Port" on page 66
■
Installing the OS
Use these topics to either configure the preinstalled OS or use an alternative OS.
"Configure the Preinstalled OS" on page 58
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 59
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 61
■
Related Information
"Oracle Solaris OS Configuration Parameters" on page 63
■

Configure the Preinstalled OS

1. Determine which OS you will use.
If you plan to use the preinstalled OS, proceed to step 2.
■
If you do not plan to use the preinstalled OS, go to
■
Fresh OS (Oracle ILOM CLI)" on page
2. When prompted, follow the onscreen instructions for configuring the Oracle
Solaris OS on your host.
You will be prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default,
and make future changes when the Oracle Solaris OS is running. See
Configuration Parameters" on page 63
you must provide during initial configuration.
3. Log in to the server.
58 SPARC T7-2 Server Installation Guide • March 2016
59.
for a description of the Oracle Solaris OS parameters
"Reach a State to Install a
"Oracle Solaris OS