Figure 4-6 Charge Complete Screens; Table 4-1 Led Labels And Meanings - Webasto PosiCharge SVS100N Operation And Maintenance Manual

Gse intelligent fast charging systems

Hide thumbs

Table Of Contents

Table of Contents

LED Label

Equalizing

Charge

Complete

80% Charged

Charging

Fault/Warning

Step 2: Stop Charging

Once the battery has been fast-charged to the SOC preset in the BMID, the SVS100N will

stop the charge and illuminate the "Charge Complete" LED. If an equalization charge is

scheduled for this battery pack, the Charge Complete will not illuminate until the equalization

has been completed. The operator may stop charging at any time without waiting for the

charge to complete, by pressing the "STOP" button or disconnecting the battery cables from

the charger.

After a charge has been completed or stopped by the user, the screen will indicate the

method in which the charge was stopped and the data values just before the end of charging

will be displayed (see Figure 4-6).

C h g C o m p l e t e

6 2 . 0 V

Step 3: Disconnect battery cables from charger

NOTE:

If the operator disconnects the cables without pressing STOP, the charger will

12876-W-03-01

Table 4-1 LED Labels and Meanings

Color

When Steady Lit

green

Battery undergoing

equalization

green

Charge Complete and stopped N/A

green

The Battery SOC is >= 80%

amber Battery connected and

charging

red

Fault (charge stopped)

1 0 0 %

0 A

7 3 F