Figure 4-17 Eq Button Action - Webasto PosiCharge SVS100N Operation And Maintenance Manual

Gse intelligent fast charging systems

Hide thumbs

Table Of Contents

Table of Contents

4.12.3.2

External Lights 1, 2 and 3

 Press <enter> to display the Light 1 setting. (Figure 4-16).

 Press <enter> again to select from the 5 Charger states of operation.

 Use the <up> and <down> buttons to choose the charger state you wish to monitor.

 Once the desired state is displayed, press <enter> to store the edited value.

 Press <clear> to exit.

4.12.4 EQ Button Action

The EQ Button Action menu is used to configure the actions of the front panel EQ button. The

three valid configurations are:

1. ALWAYS_ACTIVE – The EQ button is always active.

2. DISABLED – The EQ button is disabled.

3. WORKS_ON_EQ_DAY_ONLY – The EQ button works on scheduled EQ day only.

EQ Button Action

Configuration

EQ Button Action:

CLEAR

Always Active

EQ Button Action:

WORKS ON EQ DAY ONLY

EQ Button Action:

Disabled

The EQ button is made configurable so that the charger may be configured to prevent untrained

or unauthorized users from causing excessive equalization activity by pressing the EQ button

when an EQ is not required.

4.12.4.1

Setting the EQ Button Action

From the "EQ Button Action" screen, press <enter> to display the current EQ button

configuration. Press <enter> again and the programmable parameter will flash. Use the <up>

and <down> buttons to toggle parameters. The display will continue to flash until you press

<enter> to set the displayed parameter. Press <clear> to exit.

DISABLED - This setting causes the charger to ignore the EQ button.

ALWAYS ACTIVE - This is the default setting and causes the EQ button to be active at all

times.

WORKS ON EQ DAY ONLY - This setting causes the EQ button to function only on the day of

the week programmed in the BMID for equalization.

12876-W-03-01

ENTER