Clear Backup Memory
CLEAR
Clear stored data?
Cancel
4.12.3 External Light Configuration
The External Light Configuration Menu (See Figure 4-16) allows the user two modes of
operation:
- The Selector Mode (default=Disable) when Enabled it is used to provide the capability to
command the Charger, via the diagnostic port, ie. SOC for Truck Selector, the external system
commands the Charger to illuminate the green light and extinguish the red light for the trucks
that are ready for use.
- When Selector Mode is Disable it enables the use to set 3 external lights that can be
configured to monitor any of 5 states of Charger operation.
4.12.3.1
Selector Mode
From the "External Light Configuration" screen:
Press <enter> to display the Selector Mode setting. (Default is set to Disable)
Press <enter> to select Enable / Disable Selector Mode setting.
Use the <up> and <down> buttons to choose the selector mode setting.
Press <clear> to exit
12876-W-03-01
ENTER
Figure 4-15 Clear Backup Memory Menu
SVS100N Operation/Maintenance Manual
Charger Configuration
CLEAR
Clear stored data?
OK
ENTER
Clearing Backup Mem
Please wait ...
after count to 100%
Set Date and Time
23
0%
Webasto Charging Systems, Inc.