Figure 4-25 Watering System Standard Screens - Webasto PosiCharge SVS100N Operation And Maintenance Manual

Watering System
Configuration
CLEAR
Water System Config
OFF
Water System Type:
Custom Mode
New Water System Type:
Custom Mode
Valve Turn On Time:
ON Time: 00:00 Min
CLEAR
Press ENTER and use the UP and
DOWN arrow buttons to set the
parameter to the appropriate value.
Press ENTER again to accept the
selection made.
Press CLEAR to retain the original value
Press ENTER to RUN
Water System Test
Watering..............
CLEAR
Please wait 30 sec.
Watering..............
Press STOP to end
4.12.13
Allows the user to enter the 5-character numeric charger ID.
From the "Charger ID" screen Press <enter> and the Charger ID will flash. Use the <up> and
<down> buttons to set the Charger ID. Press <enter> to accept the new value and press
<clear> to return to higher level menus.
12876-W-03-01
ENTER
SELECT
ENTER
SELECT
ENTER
CLEAR
ENTER
after 30s countdown
STOP Valve On Time time out

Figure 4-25 Watering System Standard Screens

Charger ID
Charger Configuration
CLEAR
New Water System Config
ON
SELECT
New Water Sys Type:
ENTER/CLEAR
BFS HIGH PRESSURE
New Water Sys Type:
BFS LOW PRESSURE
New Water Sys Type:
FLOW-RITE HIGH PRESSURE
New Water Sys Type:
FLOW-RITE LOW PRESSURE
New Water Sys Type:
PHIL SCIENTIFIC
New Water Sys Type:
WATERMASTER
New Water Sys Type:
PHILADELPHIA LOW PRESS
31
SVS100N Operation/Maintenance Manual
Water System Config
ON
Webasto Charging Systems, Inc.
SELECT
ENTER