Figure 4-26 Charger Id Screens - Webasto PosiCharge SVS100N Operation And Maintenance Manual

4.12.14
The Date and Time entry screens (see Figure 4-27) allow the user to review and edit the date
and time stamp in the charger. This internal date and time is used in all of the logging and
scheduling functions. Changing the date and time will not affect previously logged data. These
data are stored in the charger and are preserved even if power is removed from the charger.
Note: Incorrect programming of the date and time will result in incorrect time stamps in the log
files and mistiming any "time of day" scheduling features possibly resulting in incorrect charging
of the packs.
In each menu, press <enter> to enable editing (the value will start to flash) and use the <up>
and <down> arrows to adjust the value. Press <enter> again to accept new value, or <clear> to
cancel the editing and retain the old value.
1. Hours - Displays and edits the charger internal clock hours in 24-hour time (valid values 01-
24).
2. Minutes - Displays and edits the charger internal clock minutes (valid values 00-59).
3. Month - Displays and edits the charger internal clock month (valid values 1-12)
4. Day - Displays and edits the charger internal clock day (valid values 1-31).
5. Year - Displays and edits the charger internal clock year (valid values 2000-2099)
12876-W-03-01
Charger ID:
00000
ENTER
CLEAR
Charger ID:
00000

Figure 4-26 Charger ID Screens

Date and Time
Charger Configuration
CLEAR
Use the UP and DOWN arrow
buttons to set each of the 5 digits.
Press ENTER again to accept each
selection made.
Pressing ENTER to accept the last
th
5 character transitions to the next
Charger Configuration screen.
Press CLEAR to go back to the
previous character entered.
Press CLEAR twice to retain the
original value.
32
SVS100N Operation/Maintenance Manual
Webasto Charging Systems, Inc.