Webasto PosiCharge SVS100N Operation And Maintenance Manual page 25

10. Ventilation System allows the user to configure the operation of a ventilation system. This
feature is only applicable in systems where a ventilation system has been installed
and connected to the charger. If a Ventilation system is activated, the air pump
system is disabled. The default setting is "OFF"
11. Air Circulation Control allows the user to configure the operation of an Air Pump system.
This feature is only applicable in systems where an Air Pump system has been
installed and connected to the charger. If an air pump system is activated, the
ventilation system is disabled. The default setting is "OFF"(Not implemented at this time)
12. Watering System allows the user to set the configuration of a watering system. This
feature is only applicable in systems where a watering system has been installed and
connected to the charger. The watering system is always set to turn on two hours into the
EQ. The default setting is "OFF"
13. Charger ID allows the user to enter the charger ID (5 character numeric). The default
setting is "00000".
14. Set Date and Time allows the user to set the date and time in the internal clock of the
charger.
15. Charge Time Control allows the user to set scheduled charge delays for the charger. The
default setting is 6 hours.
16. Output Format Selection allows the user to configure the format of their output data. The
customers using the IVECs system can select the "IDS Mode" while customers that are not
using IVECs can select "Standard Mode". The default setting is "Standard Mode". This
Menu is only available in the English US Language option.
17. Battery Cool Down Time allows the user to set a selectable time delay for cool-down of a
hot battery.
12876-W-03-01
SVS100N Operation/Maintenance Manual
20 Webasto Charging Systems, Inc.