SVS100N Operation/Maintenance Manual
Battle Mode
4.4
Allows the user to manually override alarm and charge disabling features. In Battle Mode the
charge starts immediately with no pre-charge sequence. The BMID is not required but a Pilot
connection is required for anti-arching. In this mode the charger determines the number of cells
(12 or 18 cells) and it charges using the preset Battle Mode settings; start current, target voltage
and finish current. When the charger is in Battle Mode the display will alternately flash "Battle
Mode" and the normal display every second during "Battle Mode" activation.
WARNING
NORMAL
BATTLE
MODE
MODE
ON
OFF
Figure 4-3 Battle Mode Manual Switch
12876-W-03-01
9
Webasto Charging Systems, Inc.