Lincoln Electric TORCHMATE 5100 User Manual page 76

Electronic Controlled Lubricators:
To set the lubricators, you will remove the top lid to expose the dip switches.
The dip switches will arrive all in the OFF position. To adjust, get a flat head
screwdriver to move the dip switches UP to activate that switch.
An LED indicator will illuminate the "position" the dip switches are set to and will
blink every 20 seconds.
We recommend setting the dip switches to #4 ON until the machine use is determined. This setting states that the
lubricator will apply oil to the felt wiper for 6 months and the cartridge will need to be replaced.
Use this chart to help determine the proper setting for your application. If you notice "pooling" of the lubricant, then
adjust the dip switches to a longer period of time.
64
Torchmate 5100