Using the Shape Library in VMD:
In the upper left of the screen, press SELECT JOB.
Step 5:
This will open the Select a Job screen. Select the
job from the list. If you didn't save in the JOBS
folder, you will need to press BROWSE and locate
your job.
IS JOB KERF COMPENSATED? The SHAPE
LIBRARY parts DO NOT accommodate for KERF
compensation. SELECT NO and it will add the kerf
based on the material thickness to the part.
On VMDNest and TMCAD programmed jobs,
SELECT YES.
Once selected, press OK. The job will display in
the GRAPHICS screen.
39
User Guide