Lincoln Electric TORCHMATE 5100 User Manual page 10

Connections between the FlexCut 200 and FlexCool 35:
1. From the cable carrier, connect the PLASMA GAS and SHIELD GAS to the FlexCut 200.
2. Attach the Plasma connections from the cable carrier to the nozzle, ARCLINK, and electrode.
3. Connect the WORK to the STAR GROUND BLOCK on the machine.
4. Connect the CNC interface cable to the BULKHEAD P1 and P2.
5. Connect the ETHERNET connector to the back of the FlexCut 200. Attach the other end to the ETH1 port to the Fiber
Optic box. Attach the fiber optic and power cable to the converter box.
For full wiring instructions, see the corresponding manuals for the FlexCut 200 and FlexCool 35.
Star Ground
P1
ETH 0 ETH 1
PLASMA
EXT. NETWORK FLEXNET
INTERFACE
Star Ground
TO
5100 BULKHEAD
Torchmate 5100
CABLE CARRIER
P3 P4
P2 POWER
CAN AUXILARY
RESERVED ENTRY
INTERFACE I/O
FROM
CABLE CARRIER
TO
STAR GROUND
FROM
x