Lincoln Electric TORCHMATE 5100 User Manual page 75

Hide thumbs Also See for TORCHMATE 5100:

Table of Contents

Basic Maintenance:

Electronic Controlled Lubricators: - pn #TMS-151-3025-00

The system is comprised of replaceable, electronically controlled oil cartridges which apply the proper amount of

lubricant onto the gear rack. The felt roller follows the gear and applies small amounts of oil to the surface of the

gear rack to reduce friction, keeping the machines performance optimal and extending the life of the gear rack. The

cartridges need to be turned on and set to the appropriate setting for your application.

At the factory, these oilers will have their application tubes primed and will "pressurize" the system to start applying the

oil to the felt rollers.

There are 3 lubricators installed on the 5100. One on each end of the gantry, under the side panels, and one behind the

torch carriage.

The cartridges will need to be replaced on a preventative maintenance schedule.

TMS-151-3025-00

User Guide

Table of Contents