Lincoln Electric TORCHMATE 5100 User Manual page 17

AUTOMATIC OPERATION:
• Any computer numerical control (CNC) machine may begin to operate automatically without warning.
Only a trained individual familiar with the software, machine, and computer system should operate this
equipment.
• All untrained persons should not work on or near a CNC machine.
• Keep the immediate area around the CNC machine clear of materials that may cause interference. Keep
area clear of bystanders.
• Do not leave the CNC machine unattended while power is on to the computer, controller, or plasma power
source of the system.
NOISE:
• Long exposure to noise can lead to hearing damage or loss. CNC operations, plasma arc cutting, plate
marking can create noise levels that exceed safe limits. Use appropriate ear protection when operating
the system
• Protect the operator and others around the system by using appropriate ear protection suited for the
work environment and decible rating of the facility.
• Recommended to test the noise levels (decibles) during operation to validate excess of safe levels.
HEAVY PARTS:
• Parts of CNC machines and raw materials can be heavy. To avoid injury, get someone to help you, or use a
mechanical lifter in the event material needs to be lifted or moved. When using a mechanical lifter, follow
all the manufacturer's safety guidelines.
FLYING DEBRIS:
• Metal cutting and marking operations create waste that can fragment and fly. Make sure you and
everyone close to the CNC machine during operations has proper eye protection.
PINCH AND CRUSH POINTS:
• Pinch and crush points are those normally moving parts of machinery, like CNC machines, that can pinch,
capture, crush, or sever parts of the body. Be aware of hazardous pinch and crush points.
• Never repair or adjust the machine without the controls on lock out/tag out.
• When the end of a CNC machine's travel creates a "hard stop," it creates a crush point. Keep fingers and
hands away from this.
• Do not stack or store any additional items on or in contact with the CNC machine, as this can create pinch
or crush points, and a falling hazard.
MECHANICAL DRIVES:
• High-speed mechanical drives made of gears, belts, and/or drive screws are used by CNC machines. Keep
clear of them during operation.
• Do not attempt to service, adjust, or otherwise touch these components without first ensuring that the
machine is on lock out/tag out.
• Secure any loose clothing and cables to prevent entanglement.
Laser Usage:
• This product contains a diode laser. Make sure to follow all safety precautions when operating.
• DO NOT look into the direct or reflected beam. This can cause eye injury up to 110 ft. (34 m) away.
• NEVER point any laser towards aircraft or vehicles; it is unsafe and illegal. The laser can cause visual
interference with pilots and drivers, and interferes with vision up to 2,400 ft (730 m) away. The laser can
be a distraction up to 4.5 miles (7.3 km) away.
• Class 3R lasers are safe when handled carefully. DO NOT look into the beam.
• Wear appropriate eye protection when working on the installation of the laser diode.
5
User Guide