Filling The Watertable - Lincoln Electric TORCHMATE 5100 User Manual

The 5100 has an automated water level feature that is controlled in the Plate Setup menu item in the VMD
software. There is a process that needs to be followed to properly fill the table to allow proper operation.
Connect your air supply to the air inlet on the machine to proceed.
Press Log On. Select Admin (password 1234).
Step 1:
Press OK.
Step 2:
Configuration.wap will open.
Press the Water Fill tab.
If the Machine Settings window does not open, in the upper left corner press MAIN MENU. In the SELECT
A PANEL window, left click on CONFIGURATION.wap. Press OK, and the Machine Settings panel will open.
Torchmate 5100
Filling the Water Table
16