Create a Bevel Cut:
Once the bevel type is selected, it will bring up the options for that bevel
process.
3. Knife Edge with Land
Each process has different variables that can be entered for
each type of cut.
Cuts with Lands will process two cuts per bevel to
accommodate the land portion.
After entering the parameters for the bevel, press OK.
Torchmate 5100
1. Knife Edge
2. Undercut
4. Undercut with Land
5. K-Cut with Land
54
1.
Knife Edge
2. Undercut
3.
Knife with Land
4. Undercut with Land
5. K-Cut with Land