Understanding the capabilities of the bevel head and the cuts that can be programmed is the first step in
getting quality cuts on the 5100. The mechanics of the bevel can support up to 50° of movement in the A and C
axis (limited by consumables). The bevel allows for a variety of complex cuts that can be produced on the 5100
with material thicker than 3/" (9/5 mm).
Bevel Cuts Available:
BEVEL KNIFE EDGE
BEVEL K-CUT WITH LAND
Torchmate 5100
5100 Bevel
Bevel Axis:
•
Z
•
•
C
A
BEVEL KNIFE EDGE WITH LAND
BEVEL UNDERCUT KNIFE EDGE
50
A - Moves toward/away from lifter station
C - Moves clockwise/counter clockwise on
lifter station
Z - Moves up/down while controlling the
height of the torch
45°
BEVEL K-CUT NO LAND
BEVEL UNDERCUT WITH LAND
45°