Lincoln Electric TORCHMATE 5100 User Manual page 58

Hide thumbs Also See for TORCHMATE 5100:

Table of Contents

VMD Nest:

Apply Tool Paths:

At the top of the screen will be FILE TYPE, SOURCE, and DESTINATION.

•

File Type: Toggles between DXF and DWG type files.

•

Source: Location of file source (i.e. Flash Drive, Job Folder)

•

Destination: Location on where the output files will save. VMD default folder is located at C:\ControllerData\Jobs

Checkboxes:

VERIFY: Verify will display the layers assigned to the part.

ARTWORK: Artwork will change the toolpaths to an ONLINE toolpath and bypass the kerf adjustments.

On the right, is the JOB PROPERTIES that will be applied to your parts when posting.

•

IMPORTING PROPERTIES holds basic changes to the POST and importing of the file.

•

TOOLING PROPERTIES holds tool pathing configuration for sequencing, kerf correction, and lead-ins.

Change this setting if you need particular lead-ins or kerf diameters.

•

LAYER MAP separates the layers present in the job. Select the appropriate process for the layers to be PLASMA,

PLASMA MARKING, IGNORE.

Once the directory is assigned, will display all of

the files in the source location.

Select the parts you want to add to the nest,

and press ADD.

Torchmate 5100

Table of Contents