Lincoln Electric TORCHMATE 5100 User Manual page 43

View Screen:
Graphics View:
The machine limits are displayed in blue. The head
is represented with white crossed lines.
• Plasma assigned tool paths are displayed in
red.
• Plate Marker assigned tool paths are
displayed in green.
• Rapid travels will be a dashed grey line.
• Zoom to Machine - Zoom to the programmed
machine limits.
• Zoom to Job - Zooms the display to the job
loaded.
• Run From Torch Position - Starts the stopped
job where the torch is located on the job.
• Maximize Plan View - Displays all views in one
screen.
Program View:
Displays the G-Code of the job that is loaded.
• Edit Job - Opens the current G-Code in the
default text editor.
• Maximize Viewport - Display all views in one
screen.
Height Control View:
This displays the lifter station movements while
operating in a moving graph.
• Trace Pause/Resume - Pauses the graph if
tracing.
• Trace Off/On - Toggles viewing the lifter
station's movement during operation.
• Maximize Viewport - Displays all views in one
screen.
31
User Guide