Lincoln Electric TORCHMATE 5100 User Manual page 5

Unpacking: Monitor Arm Assembly
Unfolding and securing the Monitor Arm Assembly requires a few bolts to be removed and reused to secure the
arm in place.
Remove the bolts that are indicated in the drawing and reuse them to secure the arm.
1. Remove the bolt from behind the monitor
and two bolts on the swing bracket.
2. Lift the monitor up and secure with the
removed bolt.
3. Grab the arm and swivel it 180 degrees into
place.
4. Re-insert the bolts to secure the arm in
place.
v
User Guide