Lincoln Electric TORCHMATE 5100 User Manual page 65

Create a Bevel Cut:
The NEST SETTINGS dialog will display which
amperage is appropriate for the material that
was selected along with the air combination
you are using. The AMPERAGE can be changed
if the thickness is within multiple amperages.
CUT GAS can be altered based on the material
and amperage being used. Press SAVE.
The job will now display in the DRAW program.
Left-click on SELECT OBJECT in the top tool bar.
Left-click on the lines to create the BEVEL. Each line will show dotted when selected. On the right side of the screen will
display the BEVEL tool path toolbar. Select the bevel type you wish to apply to the job.
53
User Guide