6
C H A P T E R
Power On and Off
This chapter explains how to work safely when servicing the Ultra 1 Creator series.
"Powering On the System" on page 1
"Powering Off the System" on page 2
6.1
Powering On the System
To power-on the system, proceed as follows.
1. Turn on power to all connected peripherals.
Note – Peripheral power is activated prior to system power so the system can
recognize the peripherals when it is activated.
2. Set the power on/standby switch to the on (I) position (
type-5 keyboard power-on key (
Power on/standby switch
FIGURE 6-1
Rear View of the System
).
FIGURE 6-2
) or press the Sun
FIGURE 6-1
6-1