9
C H A P T E R
Storage Devices
This chapter contains procedures to remove and replace the storage devices of the
system and server units. The following is the list of the storage devices and support
hardware:
"Disk Drive" on page 1
"Media Bay Chassis Bracket" on page 5
"CD-ROM Drive or 4-mm/8-mm Tape Drive" on page 10
"Diskette Drive" on page 12
9.1
Disk Drive
To remove and replace a disk drive, proceed as follows.
9.1.1
Removing a Disk Drive
1. Power-off the system.
See Section 6.2 "Powering Off the System" on page 6-2.
2. Remove the system unit cover.
See Section 7.1 "Removing the Cover" on page 7-1.
Caution – Use proper ESD grounding techniques when handling components. Wear
!
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
3. Attach the wrist strap.
See Section 7.2 "Attaching the Wrist Strap" on page 7-2.
9-1