Enclosure - Sun Microsystems Ultra 1 Creator Series Service Manual

C.6

Enclosure

The Sun Ultra 1 Creator series uses an enclosure that reflects style, ergonomics,
serviceability, functionality, versatility, and quality. Physical orientation allows for a
rack-mount or desktop installation. The enclosure design complies with all necessary
environmental and regulatory specifications.
C.6.1 Enclosure Basics
Overall dimensions of the enclosure are (width x depth x height)
16.44 inches x 17.44 inches x 4.07 inches (41.75 cm x 44.30 cm x 10.35 cm). The
enclosure houses:
One 3.5-inch (8.89cm) diskette drive
One 1.6-inch (4.06cm) CD-ROM drive in a industry standard 5.25-inch
(13.33cm) bay
Note – The CD-ROM drive slot may be used for either a CD-ROM drive or an
optional 4-mm or 8-mm tape drive.
One 1.6-inch-high (4.06cm) or two 1-inch-high (2.54cm) single-connector
3.5-inch (8.89cm) disk drives
One 9.6-inch x 11.0-inch (24.38cm x 27.94cm) system board
Eight DSIMMs
Two SBus modules
One UPA64S module
C.6.2 Enclosure Features
Enclosure features include:
Good service access for internal upgrades and field replaceable units (FRUs)
Optimized system board layout
Graphics expansion module (UPA64S connector)
UltraSPARC processor integration on to system board
All standard connectors and no splitter cables on rear panel
C-20 Ultra 1 Creator Series Service Manual • August 1996