Internal Access; Removing The Cover; Figure; Figure 7-1 Location Of Lock Block - Sun Microsystems Ultra 1 Creator Series Service Manual

7
C H A P T E R

Internal Access

This section provides step-by-step procedures to remove the Ultra 1 Creator series
cover, attach the wrist strap, and replace the cover.
"Removing the Cover" on page 1
"Attaching the Wrist Strap" on page 2
"Replacing the Cover" on page 3
7.1

Removing the Cover

To remove the cover:
1. Power off the system.
See Section 6.2 "Powering Off the System" on page 6-2
2. Use a No. 1 Phillips screwdriver to remove the lock block (

FIGURE 7-1

3. Loosen the captive screws securing the cover (
Lock block
Location of Lock Block
FIGURE 7-1
).
FIGURE 7-2
).
7-1