Figure 9-5 Chassis Bracket - Sun Microsystems Ultra 1 Creator Series Service Manual

FIGURE 9-5
3. Disconnect the following from the chassis bracket as follows (
a. Push the chassis bracket toward the disk drive bay and gently flip the chassis
bracket over and place it on top of the disk drive bay.
b. Disconnect the SCSI cable from the CD-ROM/tape drive.
c. Disconnect the peripheral power cable from the CD-ROM drive or tape drive
(P3), and from the diskette drive (P2) if any.
d. Disconnect the diskette cable from the diskette drive (if any).
4. Place the chassis bracket on an antistatic surface.
9-6 Ultra 1 Creator Series Service Manual • August 1996
Clip
Chassis Bracket
P1
DC harness
Screw (2)
):
FIGURE 9-6