Figure 8-6 Replacing The Disk Drive Fan - Sun Microsystems Ultra 1 Creator Series Service Manual
Hide thumbs
Also See for Ultra 1 Creator Series:
- Service manual (139 pages) ,
- Installation manual (61 pages) ,
- Upgrade manual (50 pages)
Table of Contents
Advertisement
Disk drive fan
FIGURE 8-6
Note – The arrow on the fan assembly indicates the airflow direction.
2. Insert the fan assembly into the fan/speaker bracket in the chassis.
3. Connect the fan connector to the fan power cable (
4. Detach the wrist strap.
5. Replace the system unit cover.
See Section 7.3 "Replacing the Cover" on page 7-3.
6. Power-on the system.
See Section 6.1 "Powering On the System" on page 6-1.
8-8
Ultra 1 Creator Series Service Manual • August 1996
Replacing the Disk Drive Fan
Fan/speaker bracket
FIGURE 8-4
Chassis
).
Advertisement
Chapters
Table of Contents
