1. Place the chassis bracket on top of the disk drive bay and connect the following to
the chassis bracket if present (
a. The diskette cable to the diskette drive.
b. The peripheral power cable to the CD-ROM drive or tape drive (P3), and to the
diskette drive (P2).
c. The SCSI cable to the CD-ROM drive or tape drive.
Disk drive bay
SCSI cable
Diskette cable
FIGURE 9-7
9-8
Ultra 1 Creator Series Service Manual • August 1996
FIGURE 9-7
Connecting Cables to the CD-ROM Drive, 4-mm/8-mm Tape Drive, and
Diskette Drive
):
P2
P3
P4