Commissioning Via Local Display; Wizards - Siemens SITRANS F Series Operating Instructions Manual

Commissioning

6.6 Commissioning via local display

6.6 Commissioning via local display
In this chapter it is described how to commission the device via the local display using the Quick
commissioning wizard.
6.6.1

Wizards

The first wizard "Quick commissioning" is a guided tour through the subsequent wizards of the
"Quick start" menu. For an easy commissioning, the "Quick commissioning" wizard is
recommended.
The wizard illustrations in this section show an overview of each wizard and of the keys used
to navigate through the wizards. In the upper left corner of each view the wizard name (for
example "Quick Commissioning") and the step name (for example "Basic Configuration") of the
wizard is shown. In the upper right corner the view number (for example 2 of 7 in the "Quick
Commissioning" wizard) is shown.
1
2
①
②
③
The purpose of the wizards is to guide you through a quick set-up of various parameters.
The following wizards are available:
● Quick commissioning
● Sensor settings
● Process values
● Inputs and outputs
● Copy configuration
● Communication
Use the
wizard.
The first view in each wizard (About) is a description of which settings/actions can be performed
using the specific wizard.
54
Wizard name
Step name / Parameter name
View number / Total views in wizard
and keys to highlight the desired HMI wizard and press right key to enter the
3
Operating Instructions, 08/2018, A5E37367739-AD
SITRANS FST030 (Modbus)