Overwriting The Meter Template File; Restoring Default Security Configuration; Overwriting Factory Module Registers - Siemens 9810 Series User Manual

9410 series - User manual

Overwriting the meter template file

1. Go to www.usa.siemens.com/pds and search for the meter template for your device.
2. Download the ZIP file and extract files.
3. Open ION Setup.
4. Click the meter to select it > Setup Assistant.
5. Click Template > Send to Meter tab.
6. Click Send.
7. Navigate to the extracted files and select the DCF file.
8. Click Open.
9. Click Proceed. The Template Paste Options dialog box opens.
10. Clear all check boxes and click OK.
11. Click Yes. The overwriting process could take a few minutes.
12. Click OK.
13. Click Exit and then OK.

Restoring default security configuration

DATA LOSS
Failure to follow these instructions can result in loss of data.
Record your device's user and password information in a secure location.
1. Open ION Setup > select the meter > Setup Assistant.
2. Click Security > Security Mode > Edit. The Open Security Configuration file dialog box
opens.
3. Select the standard.scf and click Open. If prompted, click No to use Legacy security
support.
4. Click Next to navigate to the Define individual users/passwords screen.
5. Click Finish. The Confirmation message box opens.

Overwriting factory module registers

1. Open ION Setup.
2. Ctrl + click on the meter to select it. This switches ION Setup to Advanced mode.
3. Double-click Factory Modules folder > select meter type.
4. Select the Setup Registers tab.
7EN05-0336-09
NOTE: FWN file type is also an option.
NOTICE
Cybersecurity
53