Connecting The Ac Power Cord; Connecting The Dc Power Cord - H3C MSR3610-X1 Installation Manual

Connecting the AC power cord

Make sure the device is reliably grounded.
1.
Connect one end of the power cord to the AC-input receptacle on the device. Use a bail latch to
2.
secure the plug of the power cord in place.
Connect the other end of the power cord to the AC power source.
3.
The power cord in
Figure 23 Connecting the AC power cord

Connecting the DC power cord

WARNING!
Pay attention to the mark on the power cord to avoid connection errors.
To connect the DC power cord:
Make sure the device is reliably grounded.
1.
Loosen the fastening screws on the protection cover over the DC power receptacle on the
2.
device and remove the cover.
Connect one end of the DC power cord supplied with the device to the DC receptacle on the
3.
device. Connect the two wires of the other end to the DC power source, the black wire to the
positive terminal and the blue wire to the negative terminal.
Figure 23 is for illustration only.
20