Page 1
H3C SR6602-I[IE] AI Series ICT Converged Gateways Hardware Information and Specifications New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 5W100-20200923...
Page 2
The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
Page 3
Preface This document describes hardware information for the H3C SR6602-I[IE] AI series ICT converged gateways, including views and technical specifications of the chassis and removable components, LEDs, slot arrangement, and interface numbering. This preface includes the following topics about the documentation: •...
Page 4
Convention Description Folder. Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software.
Page 5
It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device. Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
Chassis views and technical specifications SR6602-I AI series is a set of new ICT converged gateways developed by H3C for enterprise networks and AI scenarios. It uses an open architecture and innovative mechanical and electrical designs, delivers IT and CT converged solutions, and drives business innovations and rapid delivery.
Page 8
Figure1-2 Rear panel (1) Riser module slot (2) Fan tray slot 1 (3) Fan tray slot 2 (4) Fan tray slot 3 (reserved) (5) Power supply slot 2 (6) Power supply slot 1...
• For service continuity, avoid touching the power button accidentally or mistakenly during device operation. • If a virtual machine cannot be shut down gracefully, log in to it, terminate the running processes, and then shut down it. The power button is used to power on or power off the Comware system and virtual machines created on the Comware system.
Weights, dimensions, and power consumptions Chassis The device uses modular design. Its weight includes the chassis (including mounting brackets and filler panels) and its internal and external removable components. The total weight varies by the numbers and types of the removable components. Table1-2 Chassis weights and dimensions Weight (chassis only, Dimensions (H ×...
Page 12
Power supplies Table1-4 Power supply weights and dimensions Power supply model Net weight Dimensions (H × W × D) PSR250-12A1 0.6 kg (1.32 lb) 40 × 51 × 221 mm (1.57 × 2.01 × 8.70 in) PSR450-12A1 0.65 kg (1.43 lb) 40 ×...
Table1-10 Memory weights and power consumptions Memory model Net weight Max power consumption DDR4-2666-32G-2Rx4-R 0.02 kg (0.04 lb) 2.5 W Table1-11 M.2 SSD drive weights, dimensions, and power consumptions Max power M.2 SSD drive model Net weight Form factor consumption SSD-480G-SATA-M.2 0.015 kg (0.03 lb) SFF (2.5 inch)
Page 14
Contents 2 Removable component views and technical specifications ······················ 2-1 Removable component views ························································································································· 2-1 FIP modules ············································································································································ 2-1 AC power supplies ·································································································································· 2-2 DC power supplies ·································································································································· 2-3 High voltage DC supplies ························································································································ 2-3 Fan trays ················································································································································· 2-4 Riser modules ········································································································································· 2-4 Storage controllers ··································································································································...
AC power supplies PSR250-12A1 Figure2-2 PSR250-12A1 front panel (1) Latch (2) Power supply status LED (3) Handle (4) Power receptacle PSR450-12A1 Figure2-3 PSR450-12A1 front panel (1) Latch (2) Power supply status LED (3) Handle (4) Power receptacle...
DC power supplies Figure2-4 PSR450-12D front panel (1) Latch (2) Power supply status LED (3) Handle (4) Power receptacle High voltage DC supplies Figure2-5 PSR450-12AHD front panel (1) Latch (2) Power supply status LED (3) Handle (4) Power receptacle...
Fan trays Figure2-6 FAN-80-1 front panel (1) Fan tray release button (2) Fan tray status LED Riser modules Figure2-7 Riser module view (1) PCIe slot (for a storage controller or GPU) (2) GPU power connector (3) GPU support bracket and screw (4) Cable tie (for GPU power cables)
NOTE: The GPU support bracket and four screws are shipped with the riser module. Three are used for installing the GPU support bracket and one is used for securing the storage controller or GPU to the riser module. Storage controllers Figure2-8 Storage controller view (1) Storage controller golden plating (2) Storage controller cable connector...
(4) GPU power cable DIMMs Figure2-10 DIMM view (1) Notch of DIMM golden plating M.2 SSD drives Figure2-11 M.2 SSD drive view (1) Screw location of the M.2 SSD drive (2) Golden plating of the M.2 SSD drive (3) Screw for the M.2 SSD drive (shipped with the document bag for the chassis)
MIC-X interface module slots Hot swappable MIC-X interface modules The SR6602-I and SR6602-IE ICT converged devices support MIC-X interface modules. For more information about MIC-X interface modules, see H3C SR6602-I[IE] AI Series ICT Converged Gateways Interface Module Guide. Power supplies IMPORTANT: To ensure correct operation of the device when it is installed with a GPU, use two 450W power supplies to supply power to the device.
High voltage DC power supplies Table2-4 High voltage DC power supply specifications Rated input voltage Maximum output Model Maximum power range current 100 VAC to 240 VAC @ AC input 450 W 50/60 Hz PSR450-12AHD High voltage 240 VDC to 380 VDC 3.5 A 450 W DC input...
Riser modules Table2-8 Riser module specifications Model Installation slot Supported PCIe module • UN-GPU-P40-X RT-RISER-FHFL-X16 Slot 2 • UN-HBA-H460-B1 Storage controllers IMPORTANT: The device supports RAID only when two external SATA drives are installed in the device. Make sure the SATA drives are the same capacity. Redundant Array of Independent Disks (RAID) is a data storage virtualization technology that combines multiple physical disks into one logical drive group for performance improvement and data redundancy.
LEDs Chassis LEDs Figure 3-1 Chassis LEDs (1) 10GBASE-R-SFP+ Ethernet fiber port LEDs 6 through 19 (2) 10/100/1000BASE-T Ethernet copper port LEDs 20 through 31 (3) Power button/LED (4) Running status LED (RUN) (5) System alarm LED (ALM) (6) IRF LED (reserved) (7) Storage controller status LED (RAID) (8) 10GBASE-R-SFP+ Ethernet fiber port LEDs 4 and 5 (9) 10GBASE-R-SFP+ Ethernet fiber port LEDs 0 through 3...
Page 27
Status Description Mbps. No link is present on the port. A power cord is connected to the device or the Flashing red (8 Hz) power button is pressed to start up the Comware system. Flashing red (1 Hz) The BIOS is starting up. Flashing green (1 Hz) The BIOS has started and BootWare is starting up.
FIP module LEDs Figure 3-2 FIP module LEDs (1) 10GBASE-R-SFP+ Ethernet fiber port LEDs 0 through 3 (2) 1000BASE-X-SFP Ethernet fiber port LEDs 4 through 19 (3) Remove button/LED Table 3-2 FIP module LED descriptions Status Description Steady green A 10 Gbps link is present on the port. Flashing green (3 Hz) The port is sending or receiving data at 10 Gbps.
MIC-X interface module LEDs For more information about MIC-X interface module LEDs, see H3C SR6602-I[IE] AI Series ICT Converged Gateways Interface Module Guide. Power supply LEDs Figure 3-3 PSR250-12A1 power supply LEDs (1) Power status LED Figure 3-4 PSR450-12A1 power supply LEDs...
Page 30
Figure 3-5 PSR450-12D power supply LEDs (1) Power status LED Figure 3-6 PSR450-12AHD power supply LEDs (1) Power status LED Table 3-3 Power supply LED description Status Description Steady green The power supply is operating correctly. The power supply has normal power input but has Flashing green not been installed in the device.
Status Description device. • The power supply is in input undervoltage protection state. No power is present. Fan tray LEDs Figure 3-7 FAN-80-1 fan tray LEDs (1) Fan tray status LED Table 3-4 Fan tray LED description LED status Description Steady green The fan tray is operating correctly.
Page 33
Slot arrangement and interface numbering Slot arrangement Table4-1 Slot arrangement on the device Slot arrangement : FIP module slot Interface numbering Conventions The interfaces (except the management Ethernet interface) on the router are numbered interface-type X/Y/Z. The management Ethernet interface number is M-GigabitEthernet 0/0/0. •...