Connecting The Vg To Pbx; Connecting Power Cord; Figure 3-5 Power Supply Unit - H3C VG 10-40 Installation Manual

Installation Manual
H3C VG 10-40/10-41 Voice Gateway

3.7 Connecting the VG to PBX

VG 10-41 provides an analog trunk port (LINE port), i.e., FXO
port for the connection to a PBX. You can make the connection simply
by connecting one end of the telephone cable to the LINE port of the
VG and the other end to the PBX.

3.8 Connecting Power Cord

I. AC power supply unit
The VG is equipped with an external AC power supply unit with
the following features:
Rated voltage: 100 VAC to 240 VAC; 50/60 Hz
Maximum tolerance: 90 VAC to 264 VAC; 47/63 Hz
Input current: 0.5 A to 1 A
Output voltage: 12 VDC
Output current: 4 A
The following figure illustrates a power supply unit.

Figure 3-5 Power supply unit

3-8
Chapter 3 Installation