Connecting an AC power cord
Insert the power cord plug into the power receptacle of the power module.
1.
Use a cable tie to secure the power cord to the cable management bracket.
2.
Plug the other end of the power cord to the AC power receptacle of the power source.
3.
Figure 23 Securing the AC power cord (M9006)
Connecting a DC power cord
Insert the power cord plug into the power receptacle of the power module.
1.
Fasten the screw to secure the power cord.
2.
Figure 24 Connecting the power cord (M9010)
(1) Insert the power cord plug into the power module
Use a cable tie to secure the power cord to the cable management bracket. For more
3.
information, see
Connect the other end of the power cord to the power source.
4.
Connect the blue DC power cord marked with –48V to the negative terminal (–48V) on the
power source.
Connect the black DC power cord with RTN end to the positive terminal (RTN).
Figure
23.
23
(2) Fasten the screw