ARM DSTREAM-PT Reference Manual page 48

1. The TRST_PD signal allows the target board to have a second TAP reset signal which is normally
pulled-down. For more information, see the MIPI debug connector specification.
• DSTREAM-ST only supports one channel of parallel trace.
• Pins marked as RESERVED might be internally connected in DSTREAM-ST, but are not currently
supported.
101714_0100_02_en
Note
Note
Copyright © 2019 Arm Limited or its affiliates. All rights reserved.
Table 2-10 MIPI 60 pinout table (continued)
Pin Signal name
21 TRACEDATA[1]
23 TRACEDATA[2]
25 TRACEDATA[3]
27 TRACEDATA[4]
29 TRACEDATA[5]
31 TRACEDATA[6]
33 TRACEDATA[7]
35 TRACEDATA[8]
37 TRACEDATA[9]
39 TRACEDATA[10] 40
41 TRACEDATA[11] 42
43 TRACEDATA[12] 44
45 TRACEDATA[13] 46
47 TRACEDATA[14] 48
49 TRACEDATA[15] 50
51 TRACEDATA[16] 52
53 TRACEDATA[17] 54
55 TRACEDATA[18] 56
57 GND
59 RESERVED
Non-Confidential
2 Target interface connectors
2.9 MIPI 60 connector
Pin Signal name
22 TRACEDATA[21]
24 TRACEDATA[22]
26 TRACEDATA[23]
28 TRACEDATA[24]
30 TRACEDATA[25]
32 TRACEDATA[26]
34 TRACEDATA[27]
36 TRACEDATA[28]
38 TRACEDATA[29]
TRACEDATA[30]
TRACEDATA[31]
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
58 GND
60 RESERVED
2-48