Mictor B Pinout Table - ARM DSTREAM-PT Reference Manual

In this configuration, Mictor A is identical to the single
Mictor B must be placed on a 34.29mm pitch above Mictor A and provides the extra signals necessary
for 32-bit trace.

Mictor B pinout table

1. These signals are not used by Arm debug units. To maintain compatibility with other debug units,
connect the signals to the appropriate power rails.
101714_0100_02_en
Note
Copyright © 2019 Arm Limited or its affiliates. All rights reserved.
Mictor 38 connector on page
Pin Signal name
1 NC
3 NC
5 GND
7 NC
9 NC
11 NC
13 NC
15 NC
17 NC
19 NC
21 NC
23 TRACEDATA[31] 24
25 TRACEDATA[30] 26
27 TRACEDATA[29] 28
29 TRACEDATA[28] 30
31 TRACEDATA[27] 32
33 TRACEDATA[26] 34
35 TRACEDATA[25] 36
37 TRACEDATA[24] 38
Non-Confidential
2 Target interface connectors
2.7 Dual Mictor connectors
2-40.
Table 2-8 Mictor B pinout table
Pin Signal name
2 NC
4 NC
6 NC
8 NC
10 NC
12 TRACE_VTREF (1)
14 NC
16 TRACEDATA[23]
18 TRACEDATA[22]
20 TRACEDATA[21]
22 TRACEDATA[20]
TRACEDATA[19]
TRACEDATA[18]
TRACEDATA[17]
Logic 0 (1)
Logic 0 (1)
Logic 1 (1)
Logic 0 (1)
TRACEDATA[16]
2-44