Mipi 60 Connector; Figure 2-8 Mipi 60 Connector Pinout; Mipi 60 Pinout Table - ARM DSTREAM-PT Reference Manual

2.9

MIPI 60 connector

The MIPI 60 connector is a 60-way 0.5mm pitch socket which supports JTAG debug, Serial Wire Debug,
SWO trace, and up to 32-bit wide continuous-mode TPIU trace.
Typically, the socket is a QTH-030-01-L-D-A from Samtec.
To use this connector with DSTREAM-PT, use the MIPI debug cable supplied in the box contents.
• The MIPI 60 connector supports separate voltage domains for the debug and trace signals. It is
necessary to supply the appropriate voltages to both of the VTREF pins.

MIPI 60 pinout table

101714_0100_02_en
Note
Copyright © 2019 Arm Limited or its affiliates. All rights reserved.
Pin Signal name
1 DEBUG_VTREF
3 TCK
5 TDI
7 RTCK
9 nTRST
11 DBGACK
13 TRACECLK[0]
15 GND
17 TRACECTL
19 TRACEDATA[0]
Non-Confidential
2 Target interface connectors
2.9 MIPI 60 connector
1
59

Figure 2-8 MIPI 60 connector pinout

Table 2-10 MIPI 60 pinout table
Pin Signal name
2 TMS/SWDIO
4 TDO
6 nSRST
8 TRST_PD (1)
10 DBGRQ
12 TRACE_VTREF
14 RESERVED
16 GND
18 TRACEDATA[19]
20 TRACEDATA[20]
2
60
2-47