Table of Contents
Advertisement
2.8
MIPI 34 connector
The MIPI 34 connector is a 34-way 1.27mm pitch box header which supports JTAG debug, Serial Wire
Debug, SWO trace, and up to 4-bit wide continuous-mode TPIU trace.
The MIPI 34 connector supports separate voltage domains for the debug and trace signals. You must
supply the appropriate voltages to both of the VTREF pins.
This connector is rarely used on target boards. The MIPI 34 adapter and debug cable is not supplied with
the DSTREAM-ST unit, but are available on request.
MIPI 34 pinout table
101714_0100_02_en
Note
Copyright © 2019 Arm Limited or its affiliates. All rights reserved.
Pin Signal name
1
3
5
7
9
11
Non-Confidential
2 Target interface connectors
2.8 MIPI 34 connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
Figure 2-7 MIPI 34 connector pinout
Table 2-9 MIPI 34 pinout table
Pin Signal name
DEBUG_VTREF 2
TMS/SWDIO
GND
4
TCK/SWCLK
GND
6
TDO/SWO
Key (NC)
8
TDI
GND
10
nSRST
GND (1)
12
RTCK
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
2-45
Advertisement
Table of Contents
