Table of Contents
Advertisement
2.10
Auxiliary (AUX) connector
The Auxiliary (AUX) connector on the front of DSTREAM-ST is used to support external probes for
high-speed trace capture (for example, 32-bit, HSSTP, or PCIe).
This connector is not intended for user I/O. Do not attempt to connect anything other than Arm
DSTREAM-ST compatible probes.
This connector is not compatible with older RealView Trace (RVT) probes.
101714_0100_02_en
Warning
Copyright © 2019 Arm Limited or its affiliates. All rights reserved.
Non-Confidential
2 Target interface connectors
2.10 Auxiliary (AUX) connector
2-49
Advertisement
Table of Contents
